Set (router) port, Set (router) port -115 – Carrier Access Network Device Axxius 800 User Manual
Page 215

Axxius 800 - Release 2.2
5-115
CLI Commands
set
set (router) port
Use the set (router) port command to set port characteristics on a Terminal Server Router
(TSR) card.
set (router) port baudrate
Use the set (router) port baudrate command to set the baud rate on a TSR port.
Syntax:
set {tsr_card-addr} port {port-number} baudrate
{value}
Example:
set 5 port 2 baudrate 38400
The example will set the baud rate to 38400 on the second port on the TSR card
in slot 5.
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.
{port-number}
The port number (1-4) of the TSR card.
{value}
The values listed below are the baud rates that have been tested and are selectable with the
auto-completion feature. A rate that is not listed may be manually typed in the {value}
field, range is 11 to 691200. Not all baud rates will resolve exactly, in this circumstance the
closest possible rate will be chosen and the user informed of the rate.
1200
Set baud rate to 1200
2400
Set baud rate to 2400
4800
Set baud rate to 4800
9600
Set baud rate to 9600
19200
Set baud rate to 19200
38400
Set baud rate to 38400
57600
Set baud rate to 57600
115200
Set baud rate to 115200