Carrier Access Network Device Axxius 800 - Manual (Page 317)

Axxius 800 - Release 2.2 5-217
CLI Commands
show
show (router-wan) static ipx network
The show (router-wan) static ipx network command displays the current list of static IPX
network entries for the specified WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} static ipx network
Example: show 5 "LosAngeles" static ipx network
SLOT 5:
WAN Static IPX Network Settings for LosAngeles:
Network Hops Ticks Next IPX Router
00000011 2 4 00:00:00:00:00:00
Total: 1
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
show (router-wan) static mac address
The show (router-wan) static mac address command displays the current list of static IP MAC
address entries for the specified WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} static mac address
Example: show 5 "LosAngeles" static mac address
SLOT 5:
WAN Static MAC Address Settings for LosAngeles:
Device Name MAC Address
Axxius32 00:E0:97:00:E9:CD
Total: 1
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.