Carrier Access Network Device Axxius 800 - Manual (Page 144)

5-44 Axxius 800 - Release 2.2
CLI Commands
delete
delete (router) dhcp server option
Use the delete (router) dhcp server option command to delete optional DHCP server attributes
that will be advertised every time a DHCP client discovery is initiated. This provisioning takes
effect immediately and can only be performed when the DHCP server is enabled.
Syntax: delete {rtr_card-addr} dhcp server option {tag}
Example: add 2 dhcp server option 13
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP, CMG or TSR) card.
{tag}
An existing tag to be removed. Use the show (router) dhcp command to see current options.
delete (router) dns proxy
Use the delete (router) dns proxy command to remove a remote DNS server address from the
specified Router card. If this command is directed to delete the only a DNS proxy server address
then DNS proxy is disabled.
Syntax: delete {rtr_card-addr} dns proxy {ip-addr}
Example: delete 2 dns proxy 192.168.100.245
The example will delete a DNS proxy server address of 192.168.100.245 from
the Router in slot 2.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{ip-addr}
The IP address of the external DNS server, in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.