Set (router-wan) rip, Set (router-wan) rip -162 – Carrier Access Network Device Axxius 800 User Manual

Page 262

5-162

Axxius 800 - Release 2.2

CLI Commands

set

set (router-wan) rip

Use the set (router-wan) rip commands to set the type of RIP updates on the WAN interface.

set (router-wan) rip ip updates

Use the set (router-wan) rip ip updates command to set the type of RIP updates on the
specified WAN interface.

Syntax:

set {rtr_card-addr} {"wan-name"} rip ip updates

{never|periodic|triggered}

Example:

set 1 "LosAngeles" rip ip updates never

The example will set the WAN interface named "LosAngeles" on the Router
card in slot 1 to not sent RIP updates.

{rtr_card-addr} -

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{setting}

set (router-wan) rip ipx updates

Use the set (router-wan) rip ipx updates command to set the type of IPX RIP updates on
the specified WAN interface.

Syntax:

set {rtr_card-addr} {"wan-name"} rip ipx updates

{never|periodic|triggered}

Example:

set 1 "LosAngeles" rip ipx updates never

Sets the WAN interface "LosAngeles" to not sent RIP updates.

{rtr_card-addr} -

The slot number (1-8) that contains the TSR card.

{"wan-name"} -

The WAN interface to modify. The name must be enclosed in quotes.

{setting}

never

Set the WAN to not send RIP updates.

periodic

Set the WAN to send periodic RIP updates.