Carrier Access Network Device Axxius 800 - Manual (Page 359)

Axxius 800 - Release 2.2 5-259
CLI Commands
switch
switch (ds3)
Use the switch (ds3) command to switch to the standby DS3 port.
Note: for redundant Axxius systems only.
Syntax: switch {ds3-addr}
Example: switch a:1
> switch a:1
Do you really want to do this? y
OK
{ds3-addr}
In the form of {slot port}:
slot A for the controller card
port Port number (1 or 2).