Carrier Access Network Device Axxius 800 - Manual (Page 314)

5-214 Axxius 800 - Release 2.2
CLI Commands
show
show (router-wan) firewall
The show (router-wan) firewall command displays the current firewall filter settings for the
specified WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} firewall
Example: show 5 "LosAngeles" firewall
> show 5 "LosAngeles" firewall
SLOT 5:
WAN Firewall Settings for LosAngeles:
Service(s) LAN Device(s) WAN Device(s) Log
1. SMTP 192.0.0.0/8 ==> 192.0.0.0/8 Log
2. Telnet 100.0.0.0/24 ==> 200.0.0.0/24 Alm
Last ! Any * <== ==> *
{rtr_card-addr} - The slot number (1-8) that contains the Router card.
{"wan-name"} - The WAN interface to modify. The name must be enclosed in quotes.
show (router-wan) nat bypass
Use the show (router-wan) nat bypass command to see the current list of NAT bypass entries
for the WAN interface on the specified Router card.
Syntax: show {rtr_card-addr} {"wan-name"} nat bypass
Example: show 2 "RemoteUnit" nat bypass
SLOT 2:
WAN NAT Bypass Address Settings for RemoteAdit:
IP Address Netmask
156.65.0.0 255.255.255.0
201.23.16.0 255.255.255.0
Total: 2
{rtr_card-addr} - The slot number (1-8) that contains the Router card.
{"wan-name"} - The WAN interface to modify. The name must be enclosed in quotes.