Carrier Access Network Device Axxius 800 - Manual (Page 495)

Axxius 800 - Release 2.2 18-7
Maintenance
Software Loading
Upgrading Software Levels via XModem
The following upgrade can also be performed through the POTS modem.
1. Login to the Axxius 800.
2. Enter: load {ctrlr-id} xmodem
to download the application from the binary file. This will start the system
looking for an xmodem download.
The Axxius 800 will prompt you to send the file. Use one of the following
methods:
Using HyperTerminal
l Pull down the Transfer menu
l Select Send File Provide the filename (and path if required), confirm
that the xmodem protocol is used for the transfer, and start the
download with the Send button
l A window will show the progress of the download.
Using Procomm
l Pull down the File menu
l Select Connection Directory
l Under the Data tab, use the Basic Options button to confirm that the
xmodem protocol is used for file transfers
l Pull down the Data menu, select Send File, provide the filename, and
start the download
Another Terminal Emulation Program
When using another terminal emulation program, confirm the use of xmodem
protocol at 9600 baud, provide filename (and path) and initiate the download.
ctrlr_id Controller identifier to download the software to.
A1, A2 All, Active or Standby. Note: Always load code to the
Standby Controller.