Carrier Access Network Device Axxius 800 User Manual
Page 90
4-18
Axxius 800 - Release 2.2
Configuration
Setup of DS0 Management Channel
Add and Enable all Remote Axxius Needed
Telnet into the TSR card
1. From the CLI execute a Telnet command to the TSR card.
Telnet {slot}
Example:
telnet 1
The example will Telnet into the router located in slot 1.
2. Enter password (default is "admin") and select
[E
NTER
]
.
3. Select Terminal Emulation (scroll with
[T
AB
]
) and select
[E
NTER
]
.
Once you are in the router, the
[T
AB
]
key will move you through the menus
and the
[S
PACEBAR
]
will scroll you through selections in < >.