Carrier Access Network Device Axxius 800 - Manual (Page 138)

5-38 Axxius 800 - Release 2.2
CLI Commands
clear
clear (router) ip address table
Use the clear (router) ip address table command to flush the learned entries from the IP
address table for the specified interface from the specified Router card.
Syntax: clear {rtr_card-addr} ip address table
["profile-name"]
Example: clear 2 ip address table
The example will clear all the entries on the IP address table.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The name for the Router interface profile. This name must be enclosed in quotes, with a
maximum of 11 characters.
Note: the profile-name is optional, if not specified the tables for all interfaces will be
cleared.
clear (router) mac address table
Use the clear (router) mac address table command to flush the learned entries from the MAC
address table for the specified interface from the specified TSR card.
Syntax: clear {rtr_card-addr} mac address table
["profile-name"]
Example: clear 2 mac address table "LosAngeles"
The example will clear all the entries on the "LosAngeles" interface, MAC
address table.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The name for the Router interface profile. This name must be enclosed in quotes, with a
maximum of 11 characters.
Note: the profile-name is optional, if not specified the tables for all interfaces will be
cleared.