Carrier Access Network Device Axxius 800 - Manual (Page 375)

Axxius 800 - Release 2.2 7-3
DS3 Controller Card
Features
Features
l 2 DS3 ports built into the Controller deliver bandwidth to the resident cell site for
service delivery applications and distribute residual bandwidth to remote cell
sites
l Rescues up to 35% of network bandwidth commonly stranded at the cell sites
l Provides full, non-blocking connectivity between the DS3 Controller card and
any of the 8 service card slots
l Features an integrated 3/1/0 digital cross-connect for service grooming and
restoration
l Enables remote SNMP, EMS or Telnet provisioning, monitoring and testing of
services and network conditions.
Technical Specifications
Product Includes
l Built-in non-blocking 3/1/0 Digital Cross-connect System
l Robbed-bit (voice) and clear channel (data) signaling on the same DS3
l Integral dual DS3 ports that support drop-and-insert applications
l RFC 2496 performance monitoring statistics: Ninety-six 15 minute segments
(24 hour period)
l Performance Report Messages
l Front-panel LED indicators for DS3 system and line status
l Controller support for Terminal Server Router card code download through its
Ethernet management port
l Configurations automatically stored in non-volatile memory
l SNMP agent, supporting MIB objects:
- RFC 1213 (MIB-II) - RFC 2233 (IF-MIB)
- RFC 1659 (V.35) - RFC 2494 (DS0-MIB)
- RFC 1907 (SNMPv2-MIB) - RFC 2496 (DS3-MIB)
- RFC 2011 (IP-MIB)