Carrier Access Network Device Axxius 800 User Manual
Page 157

Axxius 800 - Release 2.2
5-57
CLI Commands
delete
delete (router-wan) static mac address
Use the delete (router-wan) static mac address command to delete a static MAC address
entry from the specified WAN interface.
Syntax:
delete {rtr_card-addr} {"wan-name"} static mac address
{mac-addr}
Example:
delete 3 "LosAngeles" static mac address
0x00e09700e9cd
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{mac-addr}
The MAC address to add to the learned address table for the LAN, in the form
0xxxxxxxxxxxxx. Please note the address is preceeded by 0x.
delete (router-wan) static nat address
Use the delete (router-wan) static nat address command to delete a static NAT mapping
from the specified WAN interface.
Syntax:
delete {rtr_card-addr} {"wan-name"} static nat address
{local-ip-addr} {nat-ip-addr}
Example:
delete 3 "LosAngeles" static nat address 10.0.0.5
34.56.102.222
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{local-ip-addr}
IP address of the local IP host, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
{nat-ip-addr}
The NAT public IP address, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.