Carrier Access Network Device Axxius 800 - Manual (Page 152)

5-52 Axxius 800 - Release 2.2
CLI Commands
delete
delete (router-lan) static ipx network
Use the delete (router-lan) static ipx network command to delete a static IPX network
(route) to the specified LAN interface.
Syntax: delete {rtr_lan-addr} static ipx network {network}
{next-hop-ip-addr}
Example: delete 3:1 static ipx network 0x11 0x00e09700e9cd
The example will delete a static IPX route to network 0x11, using a next hop
Router at MAC address 00:e0:97:00:e9:cd, from the LAN interface on the
Router card in slot 3.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{network}
The IPX network number in HEX (0x...).
{next-hop-ip-addr}
The MAC address of the next hop Router, in the form a 6-octet HEX value, in the form
0xxxxxxxxxxxxx. Please note the address is preceeded by 0x.
slot Slot number (1-8) that contains the Router card.
port Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed in
quotes, with a maximum length of 11 characters.