Carrier Access Network Device Axxius 800 - Manual (Page 278)

5-178 Axxius 800 - Release 2.2
CLI Commands
show
show cclabels
The show cclabels command displays all user defined DS0 cross-connect labels.
Syntax: show cclabels
Example: show cclabels
> show cclabels
Current DS0 Connection Labels:
---------- ---------- ---------- ---------- ----------
’label1’ ’label2’ ’label3’ ’label4’ ’V35label’
’test’
show clock
The show clock command displays the primary and secondary clocks.
Syntax: show clock
Example: show clock
This example will display the primary and secondary clock source.
> show clock
Primary Master Transmit Clock Source: Internal
Secondary Transmit Clock Source: Internal