Lenze E94ARNE Regenerative power supply - Manual (Page 36)

9400 regenerative power supply module | Parameter setting
Device interface
36
L
EDS94ARNExxxx EN 2.3 - 06/2014
4 Device interface
This chapter will provide you with information on the device interface via which you can
query the states of the regenerative power supply module and set it to specific states.

How to get to the parameterisation dialog of the device interface:
1. Select the regenerative power supply module in the Project view of the »Engineer«.
2. Change to the Application parameters tab in the Workspace.
3. Click the Device interface button in the Overview dialog box.
Parameterisation dialog in the »Engineer«
 The white buttons display the configuration of the device interface inputs.
 LS_DriveInterface - device interface
( 259)
– The assignment is defined by the technology application selected and can, if
required, be reconfigured by clicking the corresponding button.
 If you click a button marked with the icon, you get one level deeper in the
corresponding parameterisation dialog.