Lenze E94ARNE Regenerative power supply - Manual (Page 267)

EDS94ARNExxxx EN 2.3 - 06/2014
L
267
9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
10.1.2 Parameters with read-only access
Parameters for which the "write access" attribute has not been set can only be read and not
be changed by the user.
Description structure
Representation in the »Engineer«
The »Engineer« displays these parameters with a grey background or, with an online
connection, with a pale-yellow background:
10.1.3 Parameters with write access
Only parameters with a check mark () in front of the "write access" attribute can be
changed by the user. The Lenze setting for these parameters is printed in bold.
 The settings are either selected by means of a selection list or by entering the values
directly.
 Values outside the valid setting range are represented in red in the »Engineer«.
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Display range
(min. value | unit | max. value)
 Read access  Write access  CINH  PLC STOP  No transfer