Lenze E94ARNE Regenerative power supply - Manual (Page 284)

9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C00150
284
L
EDS94ARNExxxx EN 2.3 - 06/2014
C00150
C00155
Parameter | Name:
C00150 | Status word device control 1
Data type: BITFIELD_16
Index: 24425
d
= 5F69
h
Status word 1 of the device interface
Value is bit-coded: Information
Bit 0 Reserved For the meaning of bits 8 ... 11 see chapter " Device
states ".
Bit 1 Pulse inhibit active
Bit 2 Reserved
Bit 3 Reserved
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Controller inhibit active
Bit 8 Device state - Bit 1
Bit 9 Device state - Bit 2
Bit 10 Device state - Bit 3
Bit 11 Device state - Bit 4
Bit 12 Warning active
Bit 13 Trouble active
Bit 14 Reserved
Bit 15 Reserved
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C00155 | Status word device control 2
Data type: BITFIELD_16
Index: 24420
d
= 5F64
h
Status word 2 of the device interface
Value is bit-coded:
Bit 0 Error status active
Bit 1 Reserved
Bit 2 Current limit reached
Bit 3 Reserved
Bit 4 Drive switched on/in operation
Bit 5 Drive ready for operation
Bit 6 Error active
Bit 7 Drive initialisation
Bit 8 Line rotates CCW
Bit 9 Reserved
Bit 10 Power regeneration blocked
Bit 11 Application active
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Reserved
 Read access  Write access  CINH  PLC STOP  No transfer