C02830 | digital inputs: delay time, C02854 | service code, C02856 | service code – Lenze E94ARNE Regenerative power supply User Manual
Page 339: C02857 | service code, C02858 | service code, C02861 | service code, C02830

EDS94ARNExxxx EN 2.3 - 06/2014
L
339
9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C02830
C02830
C02854
C02856
C02857
C02858
C02861
Parameter | Name:
C02830 | Digital inputs: Delay time
Data type: UNSIGNED_8
Index: 21745
d
= 54F1
h
Input filter for digital inputs
• Can be used to filter "spikes" at the digital inputs, if necessary.
• Each digital input is assigned to a subcode.
• Since the filter is a "counting" filter, the indicated times are only approximate values.
Selection list
(Lenze setting printed in bold)
Information
0 2 μs
Filter time
1 4 μs
2 8 μs
3 16 μs
4 32 μs
5 64 μs
6 128 μs
7 256 μs
8 512 μs
9 1024 μs
10 2048 μs
11 4096 μs
12 8192 μs
13 16384 μs
14 32768 μs
Subcodes
Lenze setting
Information
C02830/1
0: 2 μs
Setting for digital input 1 ... 8
C02830/...
C02830/8
Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C02854 | Service code
Data type: UNSIGNED_32
Index: 21721
d
= 54D9
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C02856 | Service code
Data type: VISIBLE_STRING
Index: 21719
d
= 54D7
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C02857 | Service code
Data type: VISIBLE_STRING
Index: 21718
d
= 54D6
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C02858 | Service code
Data type: UNSIGNED_8
Index: 21717
d
= 54D5
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C02861 | Service code
Data type: UNSIGNED_32
Index: 21714
d
= 54D2
h
This code is used internally by the device and must not be overwritten by the user!