Lenze E94ARNE Regenerative power supply - Manual (Page 215)

EDS94ARNExxxx EN 2.3 - 06/2014
L
215
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
Combination of module in MXI1/device not possible [0x00680020]
Combination of module in MXI2/device not possible [0x00680021]
Code Refresh [0x00690000]
Internal error (memory area - logbook) [0x00690001]
Internal error (LDS instance data) [0x00690002]
Internal error (LDS tasks) [0x00690003]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in module slot MXI1 is not
supported by the regenerative power supply module.
• Remove the extension module and switch the mains.
• Plug in supported extension module and switch the
mains.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in module slot MXI2 is not
supported by the regenerative power supply module.
• Remove the extension module and switch the mains.
• Plug in supported extension module and switch the
mains.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.