Lenze E94ARNE Regenerative power supply - Manual (Page 271)

EDS94ARNExxxx EN 2.3 - 06/2014
L
271
9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
10.1.4 Parameter attributes
Description structure
The table footer contains the parameter attributes:
Meaning of the attributes
Scaling factor
 The "scaling factor" is important for parameter access via bus systems. It is only
indicated for parameters using a data format with decimal positions:
10.1.5 Abbreviations used in parameter & selection texts
As the character length of the parameter and selection texts is limited, among others the
following abbreviations are used:
 Read access  Write access  CINH  PLC STOP  No transfer
Attribute Meaning
 Read access Read access to parameter possible.
 Write access Write access to parameter possible.
• Please also observe the following attributes:

CINH Parameter value can only be changed when the
controller is inhibited.
 PLC STOP Parameter value can only be changed when the
application is stopped.
 No transfer The parameter is not transferred to the regenerative power supply module when the
command Download parameter set is executed.
Read value (via bus system) Scaling factor Indicated value (Engineer) ⋅
=
Abbreviation Meaning
CAN module CANopen communication module (type E94AYCCA)
ENP Electronic nameplate
Ethernet module Ethernet communication module (type E94AYCEN)
MXI1 Module eXtension Interface 1 - module slot for extension 1
MXI2 Module eXtension Interface 2 - module slot for extension 2