Lenze E94ARNE Regenerative power supply - Manual (Page 266)

9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
266
L
EDS94ARNExxxx EN 2.3 - 06/2014
10.1 Structure of the parameter descriptions
Each parameter is described in the Parameter list in the form of a table which consists of
the following three areas:
Table header
The table header contains the following general notes:
 Parameter number (Cxxxxx)
 Parameter name (display text in the »Engineer» and keypad)
 Data type
 Decimal and hexadecimal parameter index for access via bus systems
Table contents
The table contains further general explanations & notes on the parameter and the possible
settings. The representation of the possible settings depends on the parameter type:
 Parameters with read-only access
 Parameters with write access
Table footer
The table footer contains the
Parameter attributes .
10.1.1 Data type
The following data types are available for parameters:
Data type Meaning
INTEGER_8 8-bit value with sign
INTEGER_16 16-bit value with sign
INTEGER_32 32-bit value with sign
INTEGER_64 64-bit value with sign
UNSIGNED_8 8-bit value without sign
UNSIGNED_16 16-bit value without sign
UNSIGNED_32 32-bit value without sign
UNSIGNED_64 64-bit value without sign
FLOATING_POINT 32-bit floating point number
VISIBLE_STRING Character string of printable characters
OCTET_STRING Character string of any characters
BITFIELD_8 8-bit value bit-coded
BITFIELD_16 16-bit value bit-coded
BITFIELD_32 32-bit value bit-coded