Monitor -27 – Yokogawa DAQWORX User Manual
Page 62

3-27
IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Us
ng the Data Mon
tor
3.10 Stoppng Communcatons between the Data
Montor and DAQ Desktop and Extng the Data
Montor
Dsconnectng from the DAQ Desktop
Click here ([File] - [Disconnect]).
When you attempt to disconnect, a message, “Communication in progress. Cancel
communications?” is displayed. Clicking the [OK] button stops communication with the
active data monitor.
The communication is resumed by clicking the connect icon on the toolbar or selecting
[File] - [Connect].
Extng the Data Montor
After stopping communications, select [File] - [Exit] or click the [×] button to exit the Data
Monitor.
If you attempt to exit while the communication is active, a message, “Communication
in progress. Cancel all communications?” is displayed. Clicking the [OK] button stops
communication with the active data monitor. Then, carry out the exit operation again.
Note
[File] - [Connect] of the menu bar switches to [File] - [Disconnect] when the connection is
activated.