Yokogawa DAQWORX - Manual (Page 245)

7-49 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the MV1000/MV2000
E-mal
Basc Settng
Set the SMTP server and mail address.
• SMTP server name
Enter the host name or IP address of the SMTP server.
• Port No.
Unless specified otherwise, set the number to the default value. The default value is 25.
• Securty
Settngs Descrpton
OFF Disables POP before SMTP.
POPbeforeSMTP Enables POP before SMTP.
• Address 1, Address 2
Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one
recipient. When entering multiple addresses, delimit each address with a space. Up
to 150 characters can be entered.
• Sender
Enter the sender e-mail address. You can enter up to 64 characters.
POP3 Settngs
If you need to use POP before SMTP, specify the POP3 server.
• POP3 Server name
Enter the host name or IP address of the POP3 server.
• Port number
Unless specified otherwise, set the number to the default value. The default value is
110.
• Logn name
Enter the POP3 server login name.
• Password
Enter the POP3 server login password. You can enter up to 32 characters.
• Send delay [second]
Enter the wait time from POP3 server authentication until transmission. Set a value in
the range of 0 to 10 (seconds).
7.5 Enterng Basc Settngs