Yokogawa DAQWORX - Manual (Page 318)

8-61 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the CX1000/CX2000
Vew Group
Click here. (Or choose the [Setting] menu - [SET [Regular] Setting].)
Specify a view group name
Select or drag from the right the type of
screen to be displayed.
Select the group to be displayed.
Type of screens
available.
Vew Groups
Up to four view groups can be registered.
Group Name
Use up to 16 characters can be entered for the group name. The group name appears
as a submenu of the [4 PANEL] display of the CX2000.
Vew Knd
The view group consists of four views. Select the type of screen to display in each view.
For version R3.02 or later, the OVERVIEW view kind cannot be selected on 0
measurement channel models.
Group
Depending on the type of view selected, the group displayed varies. When selecting a
view from the [Meas] tag, select the group from the measurement groups (Group 1 to
10). When you selecting a view from the [Control] tag, select the group from the control
groups (Group 1 to 8).
8.10 Dsplay Settngs