Yokogawa DAQWORX - Manual (Page 163)

6-36 IM WX104-01E
Detal Settng
• Tag
Settngs Descrpton
Tag Displays tags or tag numbers. Channel numbers are displayed for
channels that do not have tags or tag numbers assigned to them.
Channel Displays channel numbers.
• Tag No. (Release number 3 or later)
Select [ON] to use tag numbers.
• Language
Select the display language
• Remote controller ID
Select the remote controller ID from 0 to 31. When not using the remote control
terminal, select [OFF].
• Decmal Pont Type (Release number 3 or later)
You can set the decimal point type for the display and files saved in text format. You
can select [Point] or [Comma].
• Menu dsplay (Release number 3 or later)
To display [Basic setting mode] (menu item for switching to basic setting mode) in the
setting mode menu, select [ON].
• Batch
Batch (when the mult batch functon s not nstalled)
Select [ON] to use the batch function.
Batch operaton qty (when the /BT2 mult batch functon s nstalled;
release number 3 or later)
Specify the number of batches to use.
Settngs Descrpton
OFF Disables the multi batch function and the batch function.
1 Enables the single batch function.
2 or higher Enables the multi batch function. The table below shows the number of
batches supported by the DX1000 and DX2000.
Model
Number of Batches Supported
DX1000 2 to 6
DX2000 (standard memory model) 2 to 6
DX2000 (large memory model) 2 to 12
6.5 Enterng Basc Settngs