Yokogawa DAQWORX User Manual
Page 183
6-56
IM WX104-01E
E-mal
Set the SMTP server and mail address.
• SMTP server name
Enter the host name or IP address of the SMTP server.
• Port No.
Unless specified otherwise, set the number to the default value. The default value is
25.
• Securty (Release number 3 or later)
Select [POP before SMTP] if you need to enable POP before SMTP. To enable
authenticated e-mail transmission (Authentication SMTP), select [Auth] (release
numbers 4 and later).
• Address 1, Address 2
Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one
recipient. When entering multiple addresses, delimit each address with a space. Up
to 150 characters can be entered.
• Sender
Enter the sender e-mail address. You can enter up to 64 characters.
6.5 Enterng Basc Settngs