Yokogawa DAQWORX User Manual
Page 120
5-24
IM WX104-01E
Modbus Master Settings
When using the CX as a Modbus master, enter the Modbus master basic and command
settings. For details about the settings.
Click this tab
FTP Settings
Using the FTP function, measurement/calculation data can be automatically transferred
from the CX to the specified server as files. The FTP function can be used only with
Ethernet communications. When using the FTP function, specify the necessary [FTP
Connection] settings in the dialog box below.
2. Click the [Primary] or [Secondary] tab.
1. Click this tab.
Enter file transfer
destination settings.
5.5 Confgurng the Setup Mode
This manual is related to the following products: