Alarm mark, Copying and pasting setup data, Alarm mark -10 – Yokogawa DAQWORX User Manual
Page 137: Copying and pasting setup data -10, Copyng and pastng setup data

6-10
IM WX104-01E
Alarm Mark
Displays marks indicating the values of the high and low limit alarms, delay high and low
limit alarms, and difference high and low limit alarms. This setting is common with the
bar graph display.
Mark knd
Settngs
Descrpton
Alarm
Indicates green under normal conditions and red when an alarm is activated.
Fixed
Displays a fixed color.
Scale dsplay
To display alarm point marks, select [ON].
Mark color
If the [Mark kind] is set to [Fixed], specify the color of the alarm point marks. Click a setup
box to open its display color selection dialog box. If you select [AUTO], alarm point marks
are displayed using the specified alarm display colors (by accessing [Basic setting] >
[Alarm] > [Alarm display]; release number 3 or later).
Copyng and Pastng Setup Data
You can copy and paste settings using the [Copy], [Paste], and [Copy Details] buttons.
Selectng the Items That You Want to Copy
1.
Click the [Copy Detail] button.
The item selection dialog box opens.
2.
Select the items that you want to copy.
Items with a blue box will be copied.
Click the [X] button to close the item selection dialog box.
The item selection dialog box that opens when you click
the [Copy Detail] button
Setting items appear. An item with a blue box is selected.
An item with a gray box is not selected.
Paste to the copy destination
Copy the copy source settings
Click this button to open the item
selection dialog box and select the
items that you want to copy
6.2 Settng the Measurement Channels, Ext. Channels