Texas Instruments MSP430x1xx - Manual (Page 401)

Instruction Set Overview
B-51 Instruction Set Description
RRC[.W] Rotate right through carry
RRC.B Rotate right through carry
Syntax RRC dst or RRC.W dst
RRC dst
Operation C –> MSB –> MSB–1 .... LSB+1 –> LSB –> C
Description The destination operand is shifted right one position as shown in Figure B–6.
The carry bit (C) is shifted into the MSB, the LSB is shifted into the carry bit (C).
Figure B–9.Destination Operand—Carry Right Shift
15 0
7 0
C
Byte
Word
Status Bits N: Set if result is negative, reset if positive
Z: Set if result is zero, reset otherwise
C: Loaded from the LSB
V: Set if initial destination is positive and initial carry is set, otherwise reset
Mode Bits OscOff, CPUOff, and GIE are not affected.
Example R5 is shifted right one position. The MSB is loaded with 1.
SETC ; Prepare carry for MSB
RRC R5 ; R5/2 + 8000h –> R5
Example R5 is shifted right one position. The MSB is loaded with 1.
SETC ; Prepare carry for MSB
RRC.B R5 ; R5/2 + 80h –> R5; low byte of R5 is used