Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 58)

set prompt
2-20 Basic Configuration
set prompt
Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the command prompt to Switch 1:
D2(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Use this command to show the banner message of the day that will display at session login.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the banner message of the day:
D2(rw)->show banner motd
O Knights of Ni, you are just and
fair, and we will return with a shrubbery
-King Arthur
prompt_string Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.