Clear snmp notifyprofile, Clear snmp notifyprofile -36 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 190
clear snmp notifyprofile
5-36 SNMP Configuration
Parameters
Defaults
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to create an SNMP notify profile named area51
and associate a target
parameters entry.
D2(su)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
Use this command to delete an SNMP notify profile configuration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete SNMP notify profile “area51”:
D2(su)->clear snmp notifyprofile area51 targetparam v3ExampleParams
profile
Specifies an SNMP filter notify name.
targetparam
targetparam
Specifies an associated entry in the SNMP Target Params Table.
volatile |
nonvolatile
(Optional) Specifies a storage type.
profile
Specifies an SNMP filter notify name to delete.
targetparam
targetparam
Specifies an associated entry in the snmpTargetParamsTable.