Clear rmon channel, Show rmon filter, Clear rmon channel -17 show rmon filter -17 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 389
clear rmon channel
D-Series CLI Reference 13-17
Defaults
If an action is not specified, packets will be accepted on filter matches.
If not specified, control will be set to off.
If a description is not specified, none will be applied.
If owner is not specified, it will be set to monitor.
Mode
Switch command, read‐write.
Example
This example shows how to create an RMON channel entry:
D2(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"
clear rmon channel
Use this command to clear an RMON channel entry.
Syntax
clear rmon channel index
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON channel entry 2:
D2(rw)->clear rmon channel 2
show rmon filter
Use this command to display one or more RMON filter entries.
Syntax
show rmon filter [index index | channel channel]
description
description
(Optional) Specifies a description for this channel.
owner owner
(Optional) Specifies the name of the entity that configured this entry.
index
Specifies the channel entry to be cleared.