Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 41)

show system login
D-Series CLI Reference 2-3
show system login
Use this command to display user login account information.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to display login account information. In this case, switch defaults have
not been changed:
D2(su)->show system login
Password history size: 0
Password aging : disabled
Username Access State
admin super-user enabled
ro read-only enabled
rw read-write enabled
Table 2‐1 provides an explanation of the command output.
Table 2-1 show system login Output Details
Output Field What It Displays...
Password history size Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with
set
system password history ( page 2-7 ).
Password aging Number of days user passwords will remain valid before aging out. Configured
with
set system password aging ( page 2-6 ).
Username Login user names.
Access Access assigned to this user account: super-user, read-write or read-only.
State Whether this user account is enabled or disabled.