Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 369)

clear sntp poll-timeout
D-Series CLI Reference 12-31
Mode
Switch command, read‐write.
Example
This example shows how to set the SNTP poll timeout to 10 seconds:
D2(su)->set sntp poll-timeout 10
clear sntp poll-timeout
Use this command to clear the SNTP poll timeout.
Syntax
clear sntp poll-timeout
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the SNTP poll timeout:
D2(su)->clear sntp poll-timeout
Configuring Node Aliases
Purpose
To review, disable, and re‐enable node (port) alias functionality, which determines what network
protocols are running on one or more ports.
Commands
For information about... Refer to page...
show nodealias config 12-32
set nodealias 12-32
clear nodealias config 12-33