Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 229)

show spantree adminedge
D-Series CLI Reference 6-37
Defaults
If sid is not specified, admin path cost will be reset for Spanning Tree 0.
Mode
Switch command, read‐write.
Example
This example shows how to reset the admin path cost to 0 for ge .3.2 on SID 1:
D2(su)->clear spantree adminpathcost ge.3.2 sid 1
show spantree adminedge
Use this command to display the edge port administrative status for a port.
Syntax
show spantree adminedge [port port-string]
Parameters
Defaults
If port‐string is not specified edge port administrative status will be displayed for all Spanning Tree
ports.
Mode
Switch command, read‐only.
Example
This example shows how to display the edge port status for ge .3.2:
D2(su)->show spantree adminedge port ge.3.2
Port ge.3.2 has a Port Admin Edge of Edge-Port
set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
Syntax
set spantree adminedge port-string {true | false}
Parameters
port‐string (Optional) Displays edge port administrative status for specific
port(s). For a detailed description of possible port‐string values,
refer to “
Port String Syntax Used in the CLI ” on page 4‐1.
port‐string Specifies the edge port. For a detailed description of possible port‐string
values, refer to “
Port String Syntax Used in the CLI ” on page 4‐1.
true | false Enables (true) or disables (false) the specified port as a Spanning Tree edge
port.