Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 349)

Monitoring Network Events and Status
D-Series CLI Reference 12-11
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows a portion of the information displayed with the show logging buffer
command:
D2(su)->show logging buffer
<165>Sep 4 07:43:09 10.42.71.13 CLI[5]User:rw logged in from 10.2.1.122 (telnet)
<165>Sep 4 07:43:24 10.42.71.13 CLI[5]User: debug failed login from 10.4.1.100
(telnet)
Monitoring Network Events and Status
Purpose
To display switch events and command history, to set the size of the history buffer, and to display
and disconnect current user sessions.
Commands
history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 100, as specified in the set
history command (“
set history ” on page 12‐12).
Syntax
history
Parameters
None.
Defaults
None.
For information about... Refer to page...
history 12-11
show history 12-12
set history 12-12
ping 12-13
show users 12-13
disconnect 12-14