Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 454)

Configuring Multiple Authentication Methods
15-30 Security Configuration
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example resets the MAC authentication significant bits to 48.
D2(su)->clear macauthentication significant-bits
Configuring Multiple Authentication Methods
About Multiple Authentication Types
When enabled, multiple authentication types allow users to authenticate using more than one
method on the same port. In order for multiple authentication to function on the device, each
possible method of authentication (MAC authentication, 802.1X, PWA) must be enabled globally
and configured appropriately on the desired ports with its corresponding command set described
in this chapter.
Multiple authentication mode must be globally enabled on the device using the set multiauth
mode command.
Commands
Note: D2 devices support up to eight authenticated users per port.
For information about... Refer to page...
show multiauth 15-31
set multiauth mode 15-31
clear multiauth mode 15-32
set multiauth precedence 15-33
clear multiauth precedence 15-33
show multiauth port 15-34
set multiauth port 15-34
clear multiauth port 15-35
show multiauth station 15-36
show multiauth session 15-36
show multiauth idle-timeout 15-37