Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 112)

set port enable
4-8 Port Configuration
set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable ge .1.3:
D2(su)->set port enable ge.1.3
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [port-string]
Parameters
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display alias information for ports 1‐3 on slot 3:
D2(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
port‐string Specifies the port(s) to enable. For a detailed description of possible port‐
string values, refer to “
Port String Syntax Used in the CLI ” on page 4‐1.
port‐string (Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to “
Port String Syntax
Used in the CLI ” on page 4‐1.