Show cos unit, Clear cos all-entries, Show cos unit -30 clear cos all-entries -30 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 316
show cos unit
9-30 Policy Classification Configuration
show cos unit
Use this command to show possible CoS unit entries.
Syntax
show cos unit
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows possible unit entries for inbound rate limiting
:
D2(su)->show cos unit
Type: Unit:
irl = inbound rate limiting Kbps = Kilobits per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 512 1
clear cos all-entries
Use this command to clear all Class of Service entries except entries 0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0‐7:
D2(su)->clear cos all-entries