Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 26)

Related Documents
xxii About This Guide
Chapter 6 , Spanning Tree Configuration , describes how to review and set Spanning Tree bridge
parameters for the device, including bridge priority, hello time, maximum aging time and forward
delay; and how to review and set Spanning Tree port parameters, including port priority and path
costs. Configuring the SpanGuard and Loop Protect functions is also described.
Chapter 7 , 802.1Q VLAN Configuration , describes how to create static VLANs, select the mode of
operation for each port, establish VLAN forwarding (egress) lists, route frames according to
VLAN ID, display the current ports and port types associated with a VLAN and protocol, create a
secure management VLAN, and configure ports on the device as GVRP‐aware ports.
Chapter 8 , Differentiated Services Configuration , describes how to display and configure
Diffserv parameters.
Chapter 9 , Policy Classification Configuration , describes how to create, change or remove user
roles or profiles based on business‐specific use of network services; how to permit or deny access
to specific services by creating and assigning classification rules which map user profiles to frame
filtering policies; how to classify frames to a VLAN or Class of Service (CoS); and how to assign or
unassign ports to policy profiles so that only ports activated for a profile will be allowed to
transmit frames accordingly.
Chapter 10 , Port Priority and Rate Limiting Configuration , describes how to set the transmit
priority of each port and configure a rate limit for a given port and list of priorities.
Chapter 11 , IGMP Configuration , describes how to configure Internet Group Management
Protocol (IGMP) settings for multicast filtering.
Chapter 12 , Logging and Network Management , describes how to configure Syslog, how to
manage general switch settings, how to monitor network events and status,and how to configure
SNTP and node aliases.
Chapter 13 , RMON Configuration , describes how to use RMON (Remote Network Monitoring),
which provides comprehensive network fault diagnosis, planning, and performance tuning
information and allows for interoperability between SNMP management stations and monitoring
agents.
Chapter 14 , DHCP Server Configuration , describes how to review and configure DHCP server
parameters, how to review and configure DHCP address pools, and how to display DHCP server
information.
Chapter 15 , Security Configuration , describes how to configure 802.1X authentication using
EAPOL, how to configure RADIUS server, Secure Shell server, MAC authentication, MAC
locking, and Port Web Authentication.
Related Documents
The following Enterasys Networks documents may help you to set up, control, and manage this
device:
• Ethernet Technology Guide
• D‐Series Installation Guide(s)
Documents listed above, can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following web site:
http://www.enterasys.com/support/manuals/