Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 473)

set maclock enable
D-Series CLI Reference 15-49
Example
This example shows how to display MAC locking information for the end stations connected to all
Gigabit Ethernet ports in unit/module 2:
D2(su)->show maclock stations ge.2.*
Port Number MAC Address Status State Aging
------------ ----------------- -------------- -------------- -----
ge.2.1 00:a0:c9:39:5c:b4 active first arrival true
ge.2.7 00:a0:c9:39:1f:11 active static false
Table 15‐52 provides an explanation of the command output.
set maclock enable
Use this command to enable MAC locking globally or on one or more ports.
Syntax
set maclock enable [port‐string]
Parameters
Defaults
If port‐string is not specified, MAC locking will be enabled globally.
Mode
Switch command, read‐write.
Table 15-52 show maclock stations Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“
Port String Syntax Used in the CLI ” on page 4-1.
MAC address MAC address of the end station(s) locked to the port.
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first arrival or static connection.
Aging When true, FirstArrival MACs that have aged out of the forwarding database will be
removed for the associated port lock.
Note: MAC locking needs to be enabled globally and on appropriate ports for it to function.
port‐string (Optional) Enables MAC locking on specific port(s). For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 4‐1.