Creating and naming static vlans, Purpose, Commands – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 248: Set vlan, Creating and naming static vlans -4, Purpose -4 commands -4, Set vlan -4, Show vlan output details -4, Table 7‐30
Creating and Naming Static VLANs
7-4 802.1Q VLAN Configuration
Creating and Naming Static VLANs
Purpose
To create a new static VLAN, or to enable or disable existing VLAN(s).
Commands
set vlan
Use this command to create a new static IEEE 802.1Q VLAN, or to enable or disable an existing
VLAN.
Syntax
set vlan {create | enable | disable} vlan-list
Parameters
Defaults
None.
Table 7-30 show vlan Output Details
Output Field
What It Displays...
VLAN
VLAN ID.
NAME
Name assigned to the VLAN.
Status
Whether it is enabled or disabled.
VLAN Type
Whether it is permanent (static) or dynamic.
Egress Ports
Ports configured to transmit frames for this VLAN.
Forbidden Egress
Ports
Ports prevented from transmitted frames for this VLAN.
Untagged Ports
Ports configured to transmit untagged frames for this VLAN.
For information about...
Refer to page...
set vlan
set vlan name
clear vlan
clear vlan name
create | enable |
disable
Creates, enables or disables VLAN(s).
vlan‐list
Specifies one or more VLAN IDs to be created, enabled or disabled.