Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 451)

set macauthentication portreauthenticate
D-Series CLI Reference 15-27
set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force ge .2.1 though 5 to reauthenticate:
D2(su)->set macauthentication portreauthentication ge.2.1-5
set macauthentication macreauthenticate
Use this command to force an immediate reauthentication of a MAC address.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to reauthenticate:
D2(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
port‐string Specifies MAC authentication port(s) to be reauthenticated. For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 4‐1.
mac‐addr Specifies the MAC address of the session to reauthenticate.