Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 165)

show snmp group
D-Series CLI Reference 5-11
show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
Syntax
show snmp group [groupname groupname] [user user] [security-model {v1 | v2c | usm}]
[volatile | nonvolatile | read-only]
Parameters
Defaults
If groupname is not specified, information about all SNMP groups will be displayed.
If user is not specified, information about all SNMP users will be displayed.
If security‐model is not specified, user information about all SNMP versions will be displayed.
If not specified, information for all storage types will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP group information:
D2(su)->show snmp group
--- SNMP group information ---
Security model = SNMPv1
Security/user name = public
Group name = Anyone
Storage type = nonVolatile
Row status = active
Security model = SNMPv1
Security/user name = public.router1
Group name = Anyone
Storage type = nonVolatile
Row status = active
Table 5‐21 provides an explanation of the command output.
groupname
groupname (Optional) Displays information for a specific SNMP group.
user user (Optional) Displays information about users within the specified group.
security‐model v1 |
v2c | usm (Optional) Displays information about groups assigned to a specific
security SNMP model.
volatile |
nonvolatile | read‐
only (Optional) Displays SNMP group information for a specified storage type.