Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 418)

clear dhcp pool domain-name
14-24 DHCP Server Configuration
Syntax
set dhcp pool poolname domain-name domain
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example assigns the “mycompany.com” domain name to the address pool “auto1.”
D2(rw)->set dhcp pool auto1 domain-name mycompany.com
clear dhcp pool domain-name
Use this command to remove the domain name from the address pool being configured.
Syntax
clear dhcp pool poolname domain-name
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes the domain name from the address pool “auto1.”
D2(rw)->clear dhcp pool auto1 domain-name
set dhcp pool netbios-name-server
Use this command to assign one or more NetBIOS name servers for the DHCP clients served by
the address pool being configured. Up to 8 NetBIOS name servers can be configured.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
domain Specifies the domain name string. The domain name can be up to 255
characters in length.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.