Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 375)

Statistics Group Commands
D-Series CLI Reference 13-3
Statistics Group Commands
Purpose
To display, configure, and clear RMON statistics.
Commands
show rmon stats
Use this command to display RMON statistics measured for one or more ports.
Syntax
show rmon stats [port-string]
Parameters
Defaults
If port‐string is not specified, RMON stats will be displayed for all ports.
Mode
Switch command, read‐only.
Note: Due to hardware limitations, the only frame error counted is oversized frames.
For information about... Refer to page...
show rmon stats 13-3
set rmon stats 13-4
clear rmon stats 13-5
port‐string (Optional) Displays RMON statistics for specific port(s).