Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 293)

show policy rule
D-Series CLI Reference 9-7
Defaults
If verbose is not specified, summary information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display policy classification information for Ethernet type 2 rules
D2(su)->show policy rule ether
|PID |Rule Type |Rule Data |Mk|PortStr |RS|ST|VLAN|CoS |U|
|02 |Ether |2048 (0x0800) |16|All | A|NV|fwrd| |?|
|02 |Ether |2049 (0x0801) |16|All | A|NV|drop| |?|
|02 |Ether |2989 (0x0bad) |16|All | A|NV|drop| |?|
|02 |Ether |33079 (0x8137) |16|All | A|NV|drop| |?|
This example shows how to display policy classification information for administrative rule 1
D2(su)->show policy rule admin-pid 1
|Admin|Rule Type |Rule Data |Mk|PortStr |RS|ST|dPID|aPID|U|
|admin|Port |ge.1.1 |16|ge.1.1 | A|NV| | 1|?|
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
Table 9‐34 provides an explanation of the command output.
admin‐pid
admin‐pid Displays rules associated with a specific administrative policy ID [1..1023].
‐verbose (Optional) Displays detailed information.
usage‐list (Optional) If selected, each ruleʹs usage‐list shall be checked and shall
display only those ports which have applied this rule.
display‐if‐used (Optional) Displays rule(s) only if they are applied to at least one port.
Table 9-34 show policy rule Output Details
Output Field What It Displays...
PID Profile index number. Assigned to this classification rule with the set policy profile
command (“
set policy profile ” on page 9-4).
Rule Type Type of classification rule. Refer to Table 9-35 for valid types.
Rule Data Rule data value. Refer to Table 9-35 for valid values for each classification type.
Mk Rule data mask. Refer to Table 9-35 for valid values for each classification data
value.
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in service or not ready.