Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 444)

show macauthentication
15-20 Security Configuration
show macauthentication
Use this command to display MAC authentication information for one or more ports.
Syntax
show macauthentication [port-string]
Parameters
Defaults
If port‐string is not specified, MAC authentication information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC authentication information for ge .2.1 through 8:
D2(su)->show macauthentication ge.2.1-8
MAC authentication: - enabled
MAC user password: - NOPASSWORD
Port username significant bits - 48
Port Port Reauth Auth Auth Reauthentications
State Period Allowed Allocated
------- -------- ---------- -------- --------- -----------------
ge.2.1 disabled 3600 1
1 disabled
ge.2.2 disabled 3600 1 1 disabled
ge.2.3 disabled 3600 1 1 disabled
ge.2.4 disabled 3600 1 1 disabled
ge.2.5 disabled 3600 1 1 disabled
ge.2.6 disabled 3600 1 1 disabled
ge.2.7 disabled 3600 1 1 disabled
ge.2.8 disabled 3600 1 1 disabled
Table 15‐48 provides an explanation of the command output.
clear macauthentication significant-bits 15-29
For information about... Refer to page...
port‐string (Optional) Displays MAC authentication information for specific port(s).
For a detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.
Table 15-48 show macauthentication Output Details
Output Field What It Displays...
MAC authentication Whether MAC authentication is globally enabled or disabled. Set using the set
macauthentication command as described in “
set macauthentication ” on
page 15-22.
MAC user password User password associated with MAC authentication on the device. Set using the set
macauthentication password command as described in “ set macauthentication
password ” on page 15-23.