Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 450)

set macauthentication macinitialize
15-26 Security Configuration
set macauthentication macinitialize
Use this command to force a current MAC authentication session to re‐initialize and remove the
session.
Syntax
set macauthentication macinitialize mac-addr
Parameters
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to re‐initialize:
D2(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable MAC reauthentication on ge .4.1 though 5:
D2(su)->set macauthentication reauthentication enable ge.4.1-5
mac‐addr Specifies the MAC address of the session to re‐initialize.
enable | disable Enables or disables MAC reauthentication.
port‐string Specifies port(s) on which to enable or disable MAC reauthentication. For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.