Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 471)

show maclock
D-Series CLI Reference 15-47
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
Defaults
If port‐string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for ge .1.1.
D2(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
------- ------- -------- ------- ---------- --------------- ---------------
ge.1.1 enabled disabled enabled 20 1 00:a0:c9:39:5c:b4
Table 15‐51 provides an explanation of the command output.
set maclock static 15-52
clear maclock static 15-52
set maclock firstarrival 15-53
clear maclock firstarrival 15-54
set maclock agefirstarrival 15-54
clear maclock agefirstarrival 15-55
set maclock move 15-55
set maclock trap 15-56
For information about... Refer to page...
port‐string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.
Table 15-51 show maclock Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“
Port String Syntax Used in the CLI ” on page 4-1.