Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 457)

set multiauth precedence
D-Series CLI Reference 15-33
set multiauth precedence
Use this command to set the system’s multiple authentication administrative precedence.
Syntax
set multiauth precedence {[dot1x] [mac] }
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Usage
When a user is successfully authenticated by more than one method at the same time, the
precedence of the authentication methods will determine which RADIUS‐returned filter ID will be
processed and result in an applied traffic policy profile.
Example
This example shows how to set precedence for MAC authentication:
D2(rw)->set multiauth precedence mac dot1x
clear multiauth precedence
Use this command to clear the system’s multiple authentication administrative precedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the multiple authentication precedence:
D2(rw)->clear multiauth precedence
dot1x Sets precedence for 802.1X authentication.
mac Sets precedence for MAC authentication.
pwa Sets precedence for port web authentication